Watlow MINICHEF 2000 Griddle Applications Uživatelský manuál stáhnout pdf (Strana 25)

24 ■ Watlow MINICHEF 2000 Application 22

Program Mode Quick Reference

These are the functions, parameters and values included in the Program Mode for this

application. You must select Application 22 to access them. For menu programming

directions, see the Hardware & Software Setup Guide. The Appendix of that guide

includes a detailed explanation of all parameters and values.

Function Parameter Value Your Settings

[M`__] Menu Numbers 1 - 6 [Stpt1] Set point 1 Temp range low

Temperature of set point 1. to temp range high

[TiNe1] Time 1 Format varies based

Run time of set point 1. on configuration.

[alarn] Mid-menu Stir, Add, Flip, Turn, Alert,

Alarm None

[atine] Mid-menu 0 to Time 1

alarm time.

Auto-tuning Note:

Before auto-tuning Application 22, the Set Point 1 of Menu 1 must first be set to a value

that is typical of your application. (See the Hardware & Software Setup Guide for infor-

mation on programming menus.) Then set [tHerl] / [tunE1] to [```on]. After you

accept [```on], by pressing “Enter,” the controller will display [`tunE] while auto-

tuning is taking place.

The controller will cancel the auto-tuning process if it cannot be completed in 80 min-

utes. You can cancel the auto-tuning process at any time by pressing either key C or key

D and accepting [``Off], by pressing “Enter,” when it appears.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 45 46

Žádné komentáře

Watlow MINICHEF 2000 Griddle Applications Uživatelský manuál Strana 25